Metcal - solutions expert
Metcal - solutions expert
Metcal - solutions expert
ICCO EMT
MX-5000 Series
|
The new MX-5000 Series Soldering and Rework System is the next generation of the trusted Metcal Soldering Systems that will enable you to increase productivity and process control for a wide range of applications with these new features:
More power. With nearly double the power of its predecessor, the MX-5000 time to recovery increases production rates and throughput.
Improved ergonomics. A new Metcal Advanced™ Hand-piece for soldering and rework is carefully designed to decrease operator fatigue and enhance the operator manual dexterity resulting in productivity gains.
Greater process control. SmartHeat® Technology in every MX-5000 means that soldering and rework are always performed at safe, controlled temperatures. Metcal users know that moderate fixed temperatures, where power is varied, provide the best assurance for a well controlled soldering and rework process.
|
|
| Ambient Operating Temperature: |
10- 40°C (50°F - 104°F) |
| Maximum Enclosure Temperature: |
55°C (131°F) |
| Input Line Voltage: |
100- 240 VAC, grounded circuit |
| Input Line Frequency: |
50/60 Hz |
| Power Consumption: |
125 Watts |
| Output Power Maximum: |
80 Watts max. Per channel at 22°C |
| Output Frequency: |
13.56 MHzC |
| Power Cord 3-Wire: |
183cm (18/3") SJT |
| Dimensions w x d x h: |
12.1cm x 13.0cm x 23.5cm
(4.8" x 5.1" x 9.3") |
| Certification / Marking: |
cTUVus, CE |
| Tip-to-Ground Potential: |
< 2mV |
| Tip-to-Ground Resistance: |
< 2 ohms |
| Idle Temperature Stability: |
± 1.1°C (2°F) in still air |
| Hand-piece Cable Length: |
L=122cm (48"), burn resistant, ESD safe |
| Hand-piece Connector: |
F connector |
| Workstand Dimensions WxDxH: |
8.6cm x 19.1cm x 8.3cm
(3.4" x 7.5" x 3.3") |
| Weight of the power supply: |
7.4 lbs (3.35 kg) |
| Weight of the workstand: |
1.05 lbs (.476 kg) |
|
|
